If we use the rodless cylinder improperly or use it for a long time, it is easy to cause internal and external leakage of the rodless cylinder, insufficient output force and other faults, which will seriously affect the industrial production. Knowing certain fault maintenance techniques, so today I will briefly talk about the fault maintenance of rodless cylinders, hoping to help customers in need

        First, if the piston rod in the rodless cylinder or the cylinder head is broken, it is generally caused by the improper installation of the piston rod in the rodless cylinder or the failure of the buffer machine. Then our solution should be to properly adjust the center position of the piston rod; replace the sealing ring in the lower buffer or adjust the lower screw, which can basically solve the problem.

        Second, if the buffering effect of the rodless cylinder we use is not good, it is generally caused by the wear of the buffer sealing ring, or the damage of the adjusting screw; the solution is to replace the sealing ring and the adjusting screw to solve this problem. Problems.

        Third, when the mechanical rodless cylinder has internal and external leakage problems, it is generally because the piston rod is installed eccentrically, the lubricating oil supply in the cylinder is insufficient, the sealing ring and the sealing ring are worn or damaged, and it is more likely to be rodless. The cylinder contains impurities, etc. Therefore, when the internal and external leakage occurs in the rodless cylinder, we should readjust the center of the piston rod at the first time, and first ensure the coaxiality of the piston rod and the cylinder; we must always check whether the lubricator works normally to ensure that there is no leakage. The rod cylinder is well lubricated; if the sealing ring and the sealing ring are worn or damaged, the engineer must replace it in time; if there are impurities in the rodless cylinder, the impurities should be removed in time to ensure the normal operation of the rodless cylinder.

        Fourth, if we find that the output force of the rodless cylinder is insufficient, or even the operation is not stable, it is basically because the piston or piston rod is stuck, there is a big reason for insufficient lubrication, insufficient air supply, or It is caused by other reasons such as condensed water and impurities in the cylinder; therefore, our solution is to adjust the center of the piston rod; check whether the lower lubricator works normally; whether the air supply pipeline is blocked; if it is found that there is no rod When there is condensed water and impurities in the cylinder, we should remove it in time.